Dell PowerConnect 3524

Clock 137
Examples
The following example configures the device to accept SNTP traffic from the server on 192.1.1.1.
show clock
The show clock User EXEC mode command displays the time and date from the system clock.
Syntax
• show clock [detail]
• detail — Shows timezone and summertime configuration.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
• The symbol that precedes the show clock display indicates the following:
Console(config)# sntp server 192.1.1.1
Symbol Description
* Time is not authoritative.
(blank) Time is authoritative.
. Time is authoritative, but SNTP is not synchronized.
book.book Page 137 Thursday, December 18, 2008 7:40 PM