Dell PowerConnect 3524

DHCP Snooping 159
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example clears the DHCP binding database:
show ip dhcp snooping
The show ip dhcp snooping User EXEC mode command displays the DHCP snooping configuration.
Syntax
• show ip dhcp snooping [ ethernet interface | port-channel port-channel-number ]
•
interface — Specifies an Ethernet port.
•
port-channel-number — Specifies a Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Console# clear ip dhcp snooping database
book.book Page 159 Thursday, December 18, 2008 7:40 PM