Dell PowerConnect 3524

120 Address Table Commands
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the Multicast configuration for VLAN 1.
show ports security
The show ports security Privileged EXEC mode command displays the port-lock status.
Syntax
• show ports security [ ethernet interface | port-channel port-channel-number ]
•
interface — A valid Ethernet port .
• port-channel-number — A valid port-channel number .
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port Forward-Unregistered Forward-All
Static Status Static Status
---- --------- --------- --------- ----------
1/e1 Forbidden Filter Forbidden Filter
1/e2 Forward Forward(s) Forward Forward(s)
1/e3 - Forward(d) - Forward(d)
book.book Page 120 Thursday, December 18, 2008 7:40 PM