Dell PowerConnect 3524 User Manual

802.1x Commands 521
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
The default value of this command should be changed only to adjust for unusual circumstances, such as
unreliable links or specific behavioral problems with certain clients. and authentication servers
Examples
The following command sets the number of seconds that the device waits for a response to an EAP-
request/identity frame, to 3600 seconds.
dot1x max-req
The dot1x max-req Interface Configuration mode command sets the maximum number of times that
the device sends an Extensible Authentication Protocol (EAP)-request/identity frame (assuming that no
response is received) to the client, before restarting the authentication process. Use the no form of this
command to return to the default configuration.
Syntax
• dot1x max-req count
•
no dot1x max-req
•
count — Number of times that the device sends an EAP-request/identity frame before restarting
the authentication process. (Range: 1 - 10)
Default Configuration
The default number of times is 2.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
• The default value of this command should be changed only to adjust for unusual circumstances, such
as unreliable links or specific behavioral problems with certain clients. and authentication servers
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x timeout tx-period 3600
book.book Page 521 Thursday, December 18, 2008 7:40 PM

Dell PowerConnect 3524 Specifications

General

Throughput	9.5 Mpps
Number of queues	4
MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	No
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Input frequency	50/60 Hz
Weight (imperial)	11 lbs
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Dimensions (W x D x H) (imperial)	17.3 x 10.12 x 1.7 \
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
Gigabit Ethernet (copper) ports quantity	2
Basic switching RJ-45 Ethernet ports quantity	24
Product color	Black
Power source	AC
Input voltage	100 - 240 V
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	5000 g