424 System Management
Syntax
• reload
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example reloads the operating system.
hostname
The hostname Global Configuration mode command specifies or modifies the device host name. To
remove the existing host name, use the no form of the command.
Syntax
•
hostname
name
• no hostname
•
name
— The host name of the device. (Range: 1 - 158 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Console# reload
This command will reset the whole system and disconnect your
current session. You haven't saved your changes. Are you sure you
want to continue ? (Y/N)[N] N
book.book Page 424 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
