Configuration and Image Files 149
show running-config
The show running-config Privileged EXEC mode command displays the contents of the currently
running configuration file.
Syntax
• show running-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• This command displays the factory default settings at the end of the running configuration file
contents.
Example
The following example displays the contents of the running configuration file.
console# show running-config
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
interface ethernet e2
port monitor e3
port monitor e4
port monitor e5
port monitor e6
exit
book.book Page 149 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
