432 System Management
Example
The following example displays system version information (only for demonstration purposes).
asset-tag
The asset-tag Global Configuration mode command specifies the asset tag of the device. To return to the
default configuration, use the no form of the command.
Syntax
•
asset-tag
[
unit
unit
]
tag
•
no asset-tag
[
unit
unit
]
•
unit —
Specifies the number of the unit. (Range: 1 - 8)
•
tag
— Specifies the asset tag of the device. (Range: 1 - 16 characters)
Default Configuration
No asset tag is defined.
The default unit number is that of the master unit
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Console> show version
SW version 1.0.0.0 (date 23-Jul-2004 time 17:34:19)
Boot version 1.0.0.0 (date 11-Jan-2004 time 11:48:21)
HW version 1.0.0
Unit SW version Boot version HW version
---- ---------- ------------ ----------
1 1.0.0.0 2.178 1.0.0
2 1.0.0.0 2.178 1.0.0
book.book Page 432 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
