SNMP Commands 349
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following example configures the system contact point called Dell_Technical_Support.
snmp-server location
The snmp-server location Global Configuration mode command configures the system location string.
To remove the location string.
Syntax
•
snmp-server location
text
• no snmp-server location
•
text
— Specifies a string that describes system location information.
(Range: 0 - 160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following example defines the device location as New_York.
snmp-server set
The snmp-server set Global Configuration mode command defines the SNMP MIB value.
console(config)# snmp-server contact Dell_Technical_Support
Console(config)# snmp-server location New_York
book.book Page 349 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
