IP Addressing Commands 211
User Guidelines
• This command deletes the host name-to-address mapping temporarily until the next renewal of the IP
address.
Examples
The following example deletes all entries from the host name-to-address mapping.
show hosts
The show hosts Privileged EXEC mode command displays the default domain name; a list of name
server hosts; the static and the cached list of host names and addresses.
Syntax
•
show hosts
[
name
]
•
name —
Specifies the host name. (Range: 1 - 158 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Console# clear host dhcp *
book.book Page 211 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
