152 Configuration and Image Files
show bootvar
The show bootvar Privileged EXEC mode command displays the active system image file that is loaded
by the device at startup.
Syntax
•
show bootvar
[
unit
unit
]
•
unit
— Specifies the unit number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the active system image file that is loaded by the device at startup.
Console# show bootvar
Image Filename Version Date Status
1 image-1 1.0.0.1 Active*
2 image-2 1.0.0.2 Not active
"*" designates that the image was selected for the next boot
book.book Page 152 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
