Dell PowerConnect 3524

RMON Commands 329
show rmon alarm
The show rmon alarm User EXEC mode command displays alarm configuration.
Syntax
• show rmon alarm number
• number — Specifies the alarm index. (Range: 1 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays RMON 1 alarms.
Console> show rmon alarm 1
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
Startup Alarm: rising
Rising Threshold: 8700000
Falling Threshold: 78
Rising Event: 1
Falling Event: 1
Owner: CLI
book.book Page 329 Thursday, December 18, 2008 7:40 PM