176 Ethernet Configuration Commands
show interfaces description
The show interfaces description Privileged EXEC mode command displays the description for all
configured interfaces.
Syntax
•
show interfaces description [ethernet
interface
|
port-channel
port-channel-number
]
•
interface —
Valid Ethernet port. (Full syntax:
unit/port
)
•
port-channel-number
— A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays descriptions of configured interfaces.
Console# show interfaces description
Port
Description
---- -----------
1/e1 lab
1/e2
1/e3
1/e4
1/e5
1/e6
ch1
ch2
book.book Page 176 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
