Dell PowerConnect 3524

198 IGMP Snooping Commands
Example
The following example displays Multicast router interfaces in VLAN 1000.
show ip igmp snooping interface
The show ip igmp snooping interface User EXEC mode command displays IGMP snooping
configuration.
Syntax
• show ip igmp snooping interface vlan-id
• vlan-id — VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Console> show ip igmp snooping mrouter interface 1000
VLAN Ports
---- -----
1000 1/e1
Detected multicast routers that are forbidden statically:
VLAN Ports
---- -----
1000 1/e19
book.book Page 198 Thursday, December 18, 2008 7:40 PM