122 Address Table Commands
show ports security addresses
The show ports security addresses Privileged EXEC mode command displays the current dynamic
addresses in locked ports.
Syntax
•
show ports security addresses
[
ethernet
interface
|
port-channel
port-channel-number
]
•
interface
— A valid Ethernet port
.
•
port-channel-number —
A valid port-channel number
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
1/e18 Disabled Lock - 1 - -
1/e19 Disabled Lock - 1 - -
1/e20 Disabled Lock - 1 - -
1/e21 Disabled Lock - 1 - -
1/e22 Disabled Lock - 1 - -
Frequency: Minimum time in seconds between consecutive traps
Counter: Number of actions since last trap
book.book Page 122 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
