464 User Interface
Example
The following example changes the configuration mode from Interface Configuration mode to Privileged
EXEC mode.
exit
The exit Privileged/User EXEC mode command closes an active terminal session by logging off the
device.
Syntax
•exit
Default Configuration
This command has no default configuration.
Command Mode
Privileged and User EXEC modes.
User Guidelines
There are no user guidelines for this command.
Example
The following example closes an active terminal session.
end
The end command ends the current configuration session and returns to the Privileged EXEC mode.
Syntax
•end
Default Configuration
This command has no default configuration.
Console(config-if)# exit
Console(config)# exit
Console#
Console> exit
book.book Page 464 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
