Dell PowerConnect 3524

108 Address Table Commands
Default Configuration
The default setting is 300 seconds.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the bridge aging time to 250.
clear bridge
The clear bridge Privileged EXEC mode command removes any learned entries from the forwarding
database.
Syntax
• clear bridge
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example clears the bridge tables.
Console(config)# bridge aging-time 250
Console# clear bridge
book.book Page 108 Thursday, December 18, 2008 7:40 PM