User Interface 463
configure
The configure Privileged EXEC mode command enters the Global Configuration mode.
Syntax
• configure
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example enters Global Configuration mode.
exit (Configuration)
The exit command exits any configuration mode to the next highest mode in the CLI mode hierarchy.
Syntax
•exit
Default Configuration
This command has no default configuration.
Command Mode
All configuration modes.
User Guidelines
There are no user guidelines for this command.
Console# configure
Console(config)#
book.book Page 463 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
