Address Table Commands 113
Example
The following example displays all classes of entries in the bridge-forwarding database.
show bridge address-table static
The show bridge address-table static Privileged EXEC mode command displays statically created entries
in the bridge-forwarding database.
Syntax
•
show bridge address-table static
[
vlan
vlan
] [
ethernet
interface
|
port-channel
port-channel-number
]
Parameters
•
vlan
— Specifies a valid VLAN, such as VLAN 1.
•
interface —
A valid Ethernet port
number
.
•
port-channel-number
— A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Console# show bridge address-table
Aging time is 300 sec
Vlan mac address Port Type
--------- -------------- ---- -------
1 00:60:70:4C:73:FF 5/e8 dynamic
1 00:60:70:8C:73:FF 5/e8 dynamic
200 00:10:0D:48:37:FF 5/e9 static
book.book Page 113 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
