Dell PowerConnect 3524

IPv6 Addressing 221
Command Mode
Interface configuration (Ethernet, VLAN, Port-channel).
User Guidelines
• There are no user guidelines for this command.
Example
The following example defines an IPv6 default gateway.
show ipv6 interface
The show ipv6 interface Privileged EXEC mode command displays the usability status of interfaces
configured for IPv6.
Syntax
• show ipv6 interface [ ethernet interface-number | vlan vlan-id | port-channel number ]
•
ethernet interface-number — Ethernet port number
•
vlan vlan-id — VLAN number
•
port-channel number — Port channel number
Default Configuration
Displays all IPv6 interfaces.
Command Mode
Privileged EXEC mode.
User Guidelines
• To display IPv6 neighbor discovery cache information, use the show ipv6 neighbors command in the
privileged EXEC mode.
Console(config-if)# ipv6 mld version 1
book.book Page 221 Thursday, December 18, 2008 7:40 PM