36 Command Groups
Address Table Commands
deny (MAC) Denies traffic if the conditions defined in the deny
statement match
MAC Access-List
Configuration
service-acl Sets the default ace action to permit or deny. Interface
Configuration
show access-lists Applies an ACL to the input interface. Privileged EXEC
show interfaces access-
lists
Displays ACLs defined on the device. Privileged EXEC
Command Group Description Access Mode
bridge address Adds a static MAC-layer station source address to
the bridge table.
Interface (VLAN)
Configuration
bridge multicast filtering Enables filtering of Multicast addresses. Global
Configuration
bridge multicast address Registers MAC-layer Multicast addresses to the
bridge table, and adds static ports to the group.
Interface (VLAN)
Configuration
bridge multicast
forbidden address
Forbids adding a specific Multicast address to
specific ports.
Interface (VLAN)
Configuration
bridge multicast
unregistered
Configures the forwarding state of unregistered
multicast addresses.
Interface
Configuration
bridge multicast forward-
all
Enables forwarding all Multicast frames on a port. Interface (VLAN)
Configuration
bridge multicast
forbidden forward-all
Forbids a port from becoming a forward-all
Multicast port.
Interface (VLAN)
Configuration
bridge aging-time Sets the Address Table aging time. Global
Configuration
clear bridge Removes any learned entries from the forwarding
database.
Privileged EXEC
port security Disables new address learning/forwarding on an
interface.
Interface
Configuration
port security mode Configures the port security learning mode. Interface
Configuration
port security max Configures the maximum number of addresses that
may be learned on the port while the port is in port
security mode.
Interface
Configuration
book.book Page 36 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
