Command Groups 57
User Interface Commands
VLAN Commands
Command Group Description Access Mode
enable Enters the privileged EXEC mode. User EXEC
disable Returns to User EXEC mode. Privileged EXEC
login Changes a login username. Priv/User EXEC
configure Enables the global configuration mode. Privileged EXEC
exit (Configuration) Exits any configuration mode to the next highest
mode in the CLI mode hierarchy.
All
exit Closes an active terminal session by logging off the
device.
Priv/User EXEC
end Ends the current configuration session and returns to
the Privileged EXEC mode.
After Privileged
EXEC
help Displays a brief description of the help system. All
terminal datadump Enables dumping all output of a show command
without prompting.
User EXEC
show history Lists the commands entered in the current session. Privileged EXEC
show privilege Displays the current privilege level. User EXEC
Command Group Description Access Mode
vlan database Enters the VLAN database configuration mode. Global
Configuration
vlan Creates a VLAN. VLAN Database
interface vlan Enters the interface configuration (VLAN) mode. Global
Configuration
interface range vlan Enters the interface configuration mode to configure
multiple VLANs.
Global
Configuration
name Configures a name to a VLAN. Interface (VLAN)
Configuration
switchport access vlan Configures the VLAN ID when the interface is in
access mode.
Interface
Configuration
switchport trunk
allowed vlan
Adds or removes VLANs from a port in general mode. Interface
Configuration
book.book Page 57 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
