Configuration and Image Files 151
Syntax
• show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the contents of the running configuration file.
Console# show startup-config
software version 1.1
hostname device
interface ethernet 1/e1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 100
interface ethernet 1/e2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 100
book.book Page 151 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
