354 SNMP Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of views.
The following table describes significant fields shown above.
Console# show snmp groups
Name Security Views
Model Level Read Write Notify
-------------- ----- ----- ------- ------- -------
user-group V3 priv Default "" ""
managers-group V3 priv Default Default ""
managers-group V3 priv Default "" ""
Field Description
Name Name of the group.
Security Model SNMP model in use (v1, v2 or v3).
Security Level Authentication of a packet with encryption. Applicable only to the
SNMP v3 security model.
Views Read Name of the view that enables only viewing the contents of the
agent. If unspecified, all objects except the community-table and
SNMPv3 user and access tables are available.
Write Name of the view that enables entering data and managing the
contents of the agent.
Notify Name of the view that enables specifying an inform or a trap.
book.book Page 354 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
