Delta AH500 - Page 130

Chapter 2 Specifications and System Configuration
2-97
 AH15PM-5A
15PM
Micro SD
Ethernet
RUNSTOP
ERROR
ETH
RUN
CN1
1
12
2
3
4
7
13
6
8
9
11
10
14
5
Number
Name
Description
1
Model name
Model name of the module
2
RUN LED indicator
(green)
Operating status of the module
ON: The module is running.
OFF: The module stops running.
3
ERROR LED indicator
(red)
Error status of the module
Blinking: The module is abnormal.
4
Ethernet connection
LED indicator (green)
Status of the Ethernet connection
ON: The Ethernet connection is being connected.
OFF: The Ethernet connection is disconnected.
5
USB port
Providing the mini USB communication interface
6 RUN/STOP switch
RUN: The user program is executed.
STOP: The execution of the user program stops.
7
SD slot
Providing the SD interface
8
Connector
Connecting the module and an I/O extension cable
9
Ethernet port
Providing the Ethernet communication interface
10
Extension port
Updating the firmware
11
Label
Nameplate
12
Set screw
Fixing the module
13
Connector
Connecting the module and a backplane
14
Projection
Fixing the module