AH500 Hardware and Operation Manual
11-90
11.4.7.3 Program Change Log Page
This page displays information on any changes on the program, including changed item, date and time when
the change occurred. You can use the Clear log button to clear the program change record.
Refresh cycle
Refresh cycle time; default: 10; unit: second
“-“
Minus; click once to decrease 1; the minimum value is 1
“+“
Plus; click once to increase 1; the maximum value is 60
“Clear log”
Use this button to clear the program log in the PLC CPU
Item
The item that is changed in the program; read only
Date & Time
The date and time when the change occurred; read only
To Next Page
Loading...
