AH500 Hardware and Operation Manual
Revision History
Revision Date
st
1. The first version was published.
2
nd
2. The information about AHPS15-5A, AH32AM10N-5A,
AH32AM10N-5C, AH16AR10N-5A, AH32AN02T-5A,
AH32AN02T-5C, AH32AN02P-5A, AH32AN02P-5C,
AH08AD-5C, AH08DA-5C, AH08PTG-5A, AH15PM-5A,
AH10PFBM-5A, AH10PFBS-5A, AH10COPM-5A,
AHRTU-PFBS-5A, AHAADP01/02EF-5A, and
DVPAETB-IO34C is added to all chapters.
3. The storage temperature, the program capacity of
AHCPU500, the specifications for the input/output
relays, the functional specifications for the analog
input/output modules, the electrical specifications for
the temperature measurement modules, the response
characteristics of the input terminals on AH05PM-
5A/AH10PM-5A in Chapter 2 are updated.
4. The specifications for AH16AR10N-5A, and, the
specifications for AH15PM-5A, and the specifications
for AHPS15-5A are added to Chapter 2.
5. Section 4.2.1 is updated.
6. Section 5.1.1 is updated.
7. Point (6) is added to section 6.6.1.
8. Section 9.3.2.1 is updated.
9. Section 11.2.3 is updated, and section 11.3 is added
to Chapter 11.
10. The troubleshooting for new models is added to
Chapter 12.
11. The AH500 addresses of the T devices and the AH500
addresses of the C devices in Appendix B are
2014/06/13
3
rd
1. Information concerning AHCPU511-RS2, AHCPU511-
EN, AHCPU521-EN, AHCPU531-EN, AH08AD-5A and
AH08DA-5A is added.
2. Information concerning larger program capacity and
memory, Serial control interface with multiple
functions and high-speed Ethernet communication
interface is updated to section 1.3.
3. Instruction execution speed, maximum number of
Information concerning backplanes which can be
connected is updated in section 2.2.1. Information
concerning AH500 advanced CPU modules is added to
section 2.2.2. Information concerning arrangement of
AH32AN02P-5 input/output terminals is updated in
section 2.4.4. Information concerning Interrupt input
terminals of AH05PM-5A and input signals as well as
terminal X1.2~X1.5 of AH15PM-5A and AH20MC-5A is
updated in section 2.8.1. Informaiton concering the
applicable input/output module is updated in section
2016/08/15