Delta AH500 - 12.1 Introduction to AH10 PFBM-5 A

Chapter 11 Convenient Functions
11-89
11.4.7.2 Error Log Page
This page displays error information about backplane number, module ID, error code and the date and time
when the error occurred. You can use the Clear log button to clear the error record.
Item
Description
Refresh cycle
Refresh cycle time; default: 10; unit: second
“-“
Minus; click once to decrease 1; the minimum value is 1
“+“
Plus; click once to increase 1; the maximum value is 60
“Clear log”
Use this button to clear the error log in the PLC CPU
Rack No.
The ID of the rack in which an error occurs; read only
Slot No.
The ID of the slot in which an error occurs; read only
Module ID
The ID of the module in which an error occurs; read only
Error code
Error code; read only
Date & Time
The date and time when the error occurred; read only