Chapter 8 Hardware Configuration
8.1 Hardware Configuration Tool for AH500 Series
Modules - HWCONFIG
HWCONFIG is a built-in hardware configuration tool in ISPSoft. You can configure CPU and module
parameters, download/upload parameters, detect a hardware configuration online, and make a diagnosis
through HWCONFIG. The examples used below are from HWCONFIG 4.0 (ISPSoft V3.12). Refer to previous
versions of ISPSoft Manual for the operation examples on the previous versions of HWCONFIG.
You must download all parameters set in HWCONFIG to the CPU module for them to take effect.
The data exchange area set in HWCONFIG for modules can NOT be used repeatedly for other
communication data and vise versa.
8.1.1 Introduction of the Environment of HWCONFIG
In ISPSoft, double-click HWCONFIG in the project management area to start HWCONFIG.
To Next Page
Loading...
