Delta AH500 - Network interface

AH500 Hardware and Operation Manual
6-28
6.6.2 Downloading a Program and Parameters
If ISPSoft is connected to a PLC normally, the parameters and the program in the project can be downloaded
to the PLC. First, start ISPSoft and open the project created in the previous sections. In this example, two
types of parameters are downloaded to the CPU module. They are the hardware configuration and the
program.
 Downloading the hardware configuration
(1) Double-click HWCONFIG in the project management area to open the HWCONFIG window.
(2) The hardware configuration is displayed in the window. Before the hardware configuration is
downloaded to the CPU module, users have to make sure that the actual hardware configuration is
the same as the hardware configuration in the window.