Delta AH500 - 2.8 Specifications for Temperature Measurement Modules; 2.8.1 General Specifications

Chapter 2 Specifications and System Configuration
2-61
AH08DA-5B
AH08DA-5C
AH06XA-5A
2.8 7BSpecifications for Temperature Measurement Modules
2.8.1 31BGeneral Specifications
 AH04PT-5A
Electrical specifications
Number of analog
inputs
4
Applicable sensor
Three-wire configuration: Pt100/Ni100/Pt1000/Ni1000, and 0~300 Ω input
impedance
Two-wire/Four-wire configuration: Pt100/Ni100/Pt1000/Ni1000, and 0~300 Ω
input impedance
Pt100: DIN 43760-1980 JIS C1604-1989; 100 Ω 3850 PPM/°C
Pt1000: DIN EN60751; 1 kΩ 3850 PPM/°C
Ni100/Ni1000: DIN 43760
Supply voltage
24 VDC (20.4 VDC~28.8 VDC) (-15%~+20%)
Connector type
Removable terminal block
Overall accuracy
25°C/77°F: The error is ±0.5% of the input within the range.
-20~60°C/-4~140°F: The error is
±
1% of the input within the range.
Conversion time
Two-wire/Four-wire configuration: 150 ms/channel
Three-wire configuration: 300 ms/channel
Isolation
An analog circuit is isolated from a digital circuit by a digital integrated circuit/an
optocoupler, and the analog channels are isolated from one another by
optocouplers.
Isolation between a digital circuit and a ground: 500 VDC
Isolation between an analog circuit and a ground: 500 VDC
Isolation between an analog circuit and a digital circuit: 500 VDC
Isolation between the 24 VDC and a ground: 500 VDC
Weight 195g
± 10V, ±
20mA
±
10V,0/4~20mA
AI
06XA
RUN
ERROR
AO
ZP
UP
SG
VI0
AG
IO1
VO1
VO0
IO0
VI3
I3
I1
I2
V3
VI2
V2
V1
VI1
I0
V0
0/4~20mA
RUN
ERROR
08DA
IO3
AG
UP
ZP
AG
SG
SG
AG
AG
IO0
IO1
IO2
AG
IO4
AG
AG
AG
IO5
IO6
IO7
± 10V, ± 20mA
±
10V,0/4~20mA
AI
06XA
RUN
ERROR
AO
ZP
UP
SG
VI0
AG
IO1
VO1
VO0
IO0
VI3
I3
I1
I2
V3
VI2
V2
V1
VI1
I0
V0