Delta AH500 - 8.1.2.3 Rearrange Module Position by Drag and Drop

AH500 Hardware and Operation Manual
8-7
8.1.2.3 Rearrange Module Position by Drag and Drop
Except CPU modules, you can drag and drop all module graphics in Hardware Configuration area to
rearrange their positions. When the module is dragged to a other backplane, a red arrow mark appears
indicating the position where the module will be after dropping.
* When rearranging the module position, the input/output device range, comment, internal parameters,
corresponding device D and advanced parameters for intelligent modules are also rearranged with the
module.