Chapter 8 Hardware Configuration
8.1.3.5 Ethernet - Basic
If a CPU module is equipped with an Ethernet port, you can click the option of Ethernet─Basic to set up the
communication parameters.
If users select Static in the Mode, they can specify an IP address, a subnet mask, and a gateway
address.
You can set the time for the connection to keep alive here. If no data is transmitted from the CPU module
on a network, and the keep alive period has elapsed, the CPU module will be disconnected from the
network automatically.
If Dynamic is selected in the Mode, the IP address, the subnet mask, and the gateway address are
assigned by a DHCP/BOOTP server.
If AH5x1 or AH560 Series is used, you can set the DNS addresses here.
To Next Page
Loading...
