AH500 Hardware and Operation Manual
11-64
11.3.1.3 Modbus Data Exchange - Downloading/Uploading Parameters
After users set data exchange blocks, they have to download the parameters which are set to the PLC used.
This section briefly introduces the downloading/uploading of the parameters set. Please refer to chapter 3 in
ISPSoft User Manual for more information. Before the users download the parameters which are set, they have
to make sure that ISPSoft connects to the PLC used normally. Please refer to section 2.4 in ISPSoft User
Manual for more information.
After the users click
, parameters set will be downloaded. After the users click , parameters in the PLC
used will be uploaded.
After the users select the COM checkbox under the tab of HWCONFIG Data Echange, and click Download,
the parameters related to the COM will be downloaded.
To Next Page
Loading...
