Delta AH500 - 11.4.5 Network configuration; 11.4.5.1 Account management

Chapter 11 Convenient Functions
11-79
11.4.5 Network configuration
You can set network related configurations here.
11.4.5.1 Account management
You can set 3 kinds of access types for up to 8 user accounts.
Item Description
User ID
To name your user ID, you can use up to 16 characters from
the following characters, A through Z (case-insensitive ), 0
through 9, _ (underscore) , (comma) and . (dot) .

The first default user ID is “Admin” (read only).
Password
To name your password, you can use up to 16 characters from
the following characters, A through Z (case-insensitive ), 0
through 9, _ (underscore) , (comma) and . (dot) .
 No password for the default user ID “Admin” (read
only), you can set up the password later.
Access type
Administrator: You can set up all parameters and have
permission to edit the password and permission.
Write/Read: You can open the data monitor pages and the
diagnostic page. You can also edit the parameters.
Read: You can open the data monitor pages and the
diagnostic page. But you cannot edit parameters.

Default user is “Administrator”.
“Delete”
Use “Delete” to clear the user ID and password.
“Apply”
Use “Apply” to save the settings.