Delta AH500 - 12.4.10 AH10 PFBS-5 A

Chapter 12 Troubleshooting
12-91
12.4.10 AH10PFBS-5A
Error code Description
LED indicator status
CPU
Module
BUS FAULT
RUN
NET
16#A4F0
The node address of AH10PFBS-5A
exceeds the valid range.
The red light is ON.
The green
light is ON.
The green
light is ON.
16#A4F1 Internal hardware error The red light is ON.
The green
light is ON.
The green
light is ON.
16#A4F2 Parameter error The red light is ON.
The green
light is ON.
The green
light is ON.
16#A4F3 Configuration error The red light is ON.
The green
light is ON.
The green
light is ON.
16#A4F4 GPIO detection error The red light is ON.
The green
light is ON.
The green
light is ON.
16#A4F5
AH10PFBS-5A enters the mode of
factory test.
The red light is ON.
The green
light is ON.
The green
light is ON.
16#A4F6
1. AH10PFBS-5A has not been
connected to the PROFIBUS-DP
network.
2. PROFIBUS-DP master has not
configured AH10PFBS-5A slave or
the configured node address of
AH10PFBS-5A is inconsistent with
that of the actually connected one.
The red light is ON.
The green
light is ON.
The red light
is ON.