Chapter 7 Memory Card
7.7 Backup
If the backup source/backup destination is an AH500 series CPU module or the memory card inserted in an
AH500 series CPU module, users have to make sure that ISPSoft is connected to the AH500 series CPU
module normally. Please refer to section 2.4 in ISPSoft User Manual for more information.
(1)
Select the Backup (To DUP File) option button in the CARD Utility window, and then click Next.
(2)
Select a backup source, and then click Next.
After the users select the ISP Project (Compiled and saved) option button, they have to click , and
select an isp file in the Open window. If the program in the isp file selected is not compiled, a message
appears when the isp file is backed up. Open the isp file with ISPSoft, compile the program in the isp file,
and save the isp file. After the program in the isp file is compiled, the users can back up the isp file.
To Next Page
Loading...
