Delta AH500 - 5.4.5 Start Addresses for Network Modules

AH500 Hardware and Operation Manual
5-20
5.4.5 Start Addresses for Network Modules
Users can assign input registers and output registers to a network module through HWCONFIG in ISPSoft.
The input registers should be in the range of D0 to D65535, and the output registers should be in the range of
D0 to D65535. Take AH10EN-5A for instance. The original input registers are D0~D19. Users can change the
input device range from D0~D19 to D150~D169.
 Default input device range: D0~D19
 User-defined input device range: D150~D169