Chapter 8 Hardware Configuration
8.2.6 External Interrupts
There are 212 external interrupts (I40~I251). If a peripheral device sends an interrupt request, the
corresponding interrupt task will be executed. Take AH06XA-5A for instance. The steps of setting AH06XA-5A
are as follows.
(1) After users click Channel mode setting in the Parameter Setting window, they can set
CH0/CH1/CH2/CH3 input mode setting.
(2) After the users click Interrupt enable, they can set CH0/CH1/CH2/CH3 interrupt of over physics
Range.
To Next Page
Loading...
