Chapter 11 Convenient Functions
11-55
11.2.2.10 Starting/Stopping the Execution of an Ether Link Online
If the start mode of a node is SM Flag, users can make the node start or stop the execution of the Ether Link
constructed by means of controlling the state of the related flag when the node is monitored online. If the node
is not monitored online, the users can not make the node start or stop the execution of the Ether Link
constructed by means of controlling the state of the related flag.
Users can make a single node/multiple nodes start or stop the execution of the Ether Link constructed. The
conditions for making a single node/multiple nodes start or stop the execution of the Ether Link constructed are
the same as the conditions for enabling/disabling the function of monitoring a single node/multiple nodes online.
Please refer to section 11.2.2.9 for more information.
A. Starting the Execution of an Ether Link
Making a single node start the execution of an Ether Link
Method 1
If users want to make a node start the execution of the Ether Link constructed, they have to select
the node, and click
on the toolbar. They can also make the node start the execution of the
Ether Link constructed by selecting the node, clicking the PLC menu, pointing to Flag Control,
and clicking Start Ether Link (Single PLC).
Method 2
Select a node, right-click the node, and click Start Ether Link (Single PLC) on the context menu.
To Next Page
Loading...
