Delta AH500 - Page 503

AH500 Hardware and Operation Manual
11-54
 Method 2
Select a data demanding node, right-click the data demanding node, and click Offline
(Disconnect from a Single Node) on the context menu.
When the data demanding node selected is not monitored, on the toolbar is not pressed. If
another node is monitored,
will be pressed.
 Disabling the function of monitoring multiple nodes
 Method 1
Click Online (All Nodes) on the PLC menu, or on the toolbar.
 Method 2
Select All Nodes on the node list, right-click All Nodes, and click Online (All Nodes) on the
context menu.