Delta AH500 - 4.12.4.3 Installing AHAADP01 EF-5 A;AHAADP02 EF-5 A on a Backplane

AH500 Hardware and Operation Manual
4-86
4.12.4.3 Installing AHAADP01EF-5A/AHAADP02EF-5A on a Backplane
The connector of AHAADP01EF-5A must be connected to the lower extension port of a backplane. The
connector of AHAADP02EF-5A must be connected to the upper extension port of a backplane.
Points for attention:
 When users install AHAADP01EF-5A/AHAADP02EF-5A on a backplane, they have to make sure that
AHAADP01EF-5A/AHAADP02EF-5A is connected to an extension port of the backplane correctly.
(AHAADP01EF-5A must be connected to the lower extension port of the backplane, and AHAADP02EF-
5A must be connected to the upper extension port of the backplane.) Otherwise, an error will occur if a
CPU module connects to AHAADP01EF-5A/AHAADP02EF-5A.