Chapter 11 Convenient Functions
11-63
Users can manage the items in the table by using the function buttons on the top.
After the users create a data exchange table, they can select a mode in the Mode drop-down list box.
*1. The mode selected will be executed only if the Enable checkbox in the window used to set an item is selected.
*2. Please refer to section 11.3.3 for more information about setting flags.
Moving the item selected in the table upwards
Moving the item selected in the table downwards
Deleting the item selected in the table
Copy
Copying the item selected in the table, and automatically adding the item which is copied to
The execution of the data exchange is enabled or disabled by means of setting flags*
2
. If the
flags are set to ON, the execution of the data exchange will be enabled.
When the PLC runs, the data exchange is executed.
The data exchange is executed whether the PLC runs or stops.
To Next Page
Loading...
