AH500 Hardware and Operation Manual
6-6
Unfold the Digital I/O Module section on the product list, find AH16AP11R-5A, and drag the module to a
vacant slot on the backplane in the system configuration area. After the module is added successfully, the
related information and the devices assigned to the module will be listed in the table at the bottom of the
window.
The system automatically assigns devices to a module which is added. If the devices assigned to a module do
no conform to what is expected, users can click the Input/Output Device Range cell for the module, click
in the cell, and type a device address in the Manual Assignment window.
To Next Page
Loading...
