AH500 Hardware and Operation Manual
6-12
(3) Click the line at the right side of the contact, click on the toolbar, and move the mouse cursor to the
red frame. Likewise, the mouse cursor appears as a coil when the mouse cursor is above or under the
red frame. Users can decide where to insert the coil.
In this example, the users do not need to decide where to insert the coil. Therefore, the mouse cursor can
be near the red frame, and the users can click the left mouse button.
(4) Click on the toolbar, or press Esc on the keyboard. After the coil is double-clicked, a drop-down list
will appear. The items on the drop-down list are Out, Set, and Reset. In this example, Set is selected.
To Next Page
Loading...
