Chapter 11 Convenient Functions
11-17
After the users select a small picture, and right-click the small picture, they can click Write Register or
Read Register on the context menu.
Write Register: The data written into the slave station specified is stored in registers in the master
station. For example, D3100~D3149 in the figure below are write registers.
Read Register: The data read from the slave station specified is stored in registers in the master
station. For example, D3000~D3099 in the figure below are read registers.
After the users click Write Register or Read Register on the context menu, a correponding register
monitoring table will appear.
A data format can be selected.
To Next Page
Loading...
