Chapter 11 Convenient Functions
11-57
Method 2
Select a node, right-click the node, and click Stop Ether Link (Single PLC) on the context menu.
Making multiple nodes stop the execution of an Ether Link
Method 1
If users want to make all the nodes stop the execution of the Ether Link constructed, they have to
click the PLC menu, point to Flag Control, and click Stop Ether Link (All Online Nodes). The
users can also make all the nodes stop the execution of the Ether Link constructed by clicking
on the toolbar.
Method 2
Select All Nodes on the node list, right-click All Nodes, and click Stop Ether Link (All Online
Nodes) on the context menu.
Additional remark
If a node in the display area has several Ethernet ports, users can make a port start/stop the execution of the
Ether Link constructed by means of clicking an item on the context menu which appears after they right-click
the node. The execution of an Ether Link is based on the nodes in a network. If users make a port that a node
has stop the execution of the Ether Link constructed, another node that the node has can still execute the Ether
Link constructed.
To Next Page
Loading...
