AH500 Hardware and Operation Manual
12-44
16#9B59
COM2 receives no response from
slave 25 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 25.
2. Check the communication cable.
16#9B5A
COM2 receives no response from
slave 26 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 26.
2. Check the communication cable.
16#9B5B
COM2 receives no response from
slave 27 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 27.
2. Check the communication cable.
16#9B5C
COM2 receives no response from
slave 28 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 28.
2. Check the communication cable.
16#9B5D
COM2 receives no response from
slave 29 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 29.
2. Check the communication cable.
16#9B5E
COM2 receives no response from
slave 30 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 30.
2. Check the communication cable.
16#9B5F
COM2 receives no response from
slave 31 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 31.
2. Check the communication cable.
16#9B60
COM2 receives no response from
slave 32 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 32.
2. Check the communication cable.
To Next Page
Loading...
