Delta AH500 - Page 627

AH500 Hardware and Operation Manual
12-78
Error
code
Description
CPU
Status
LED indicator status
ERROR
BUS
FAULT
16#9B50
There is no response when COM2 is connected to
slave 16 by means of MODBUS.
Continue Keep Keep
16#9B51
There is no response when COM2 is connected to
slave 17 by means of MODBUS.
Continue Keep Keep
16#9B52
There is no response when COM2 is connected to
slave 18 by means of MODBUS.
Continue Keep Keep
16#9B53
There is no response when COM2 is connected to
slave 19 by means of MODBUS.
Continue Keep Keep
16#9B54
There is no response when COM2 is connected to
slave 20 by means of MODBUS.
Continue Keep Keep
16#9B55
There is no response when COM2 is connected to
slave 21 by means of MODBUS.
Continue Keep Keep
16#9B56
There is no response when COM2 is connected to
slave 22 by means of MODBUS.
Continue Keep Keep
16#9B57
There is no response when COM2 is connected to
slave 23 by means of MODBUS.
Continue Keep Keep
16#9B58
There is no response when COM2 is connected to
slave 24 by means of MODBUS.
Continue Keep Keep
16#9B59
There is no response when COM2 is connected to
slave 25 by means of MODBUS.
Continue Keep Keep
16#9B5A
There is no response when COM2 is connected to
slave 26 by means of MODBUS.
Continue Keep Keep
16#9B5B
There is no response when COM2 is connected to
slave 27 by means of MODBUS.
Continue Keep Keep
16#9B5C
There is no response when COM2 is connected to
slave 28 by means of MODBUS.
Continue Keep Keep
16#9B5D
There is no response when COM2 is connected to
slave 29 by means of MODBUS.
Continue Keep Keep
16#9B5E
There is no response when COM2 is connected to
slave 30 by means of MODBUS.
Continue Keep Keep
16#9B5F
There is no response when COM2 is connected to
slave 31 by means of MODBUS.
Continue Keep Keep
16#9B60
There is no response when COM2 is connected to
slave 32 by means of MODBUS.
Continue Keep Keep
16#B100 I/O Connections Duplicated Continue Keep Keep
16#B106 Ownership Conflict Continue Keep Keep
16#B110 Target for Connection not Configured Continue Keep Keep
16#B111 Adapter RPI Not Supported Continue Keep Keep
16#B113 Out of Connections Continue Keep Keep
16#B119 Non-Listen Only Not Opened Continue Keep Keep
16#B127 Invalid Originator to Target Size Continue Keep Keep
16#B128 Invalid Target to Originator Size Continue Keep Keep
16#B129
The configuration path parameters in the EDS file are
mismatched.
Continue Keep Keep