Delta AH500 - Page 629

AH500 Hardware and Operation Manual
12-80
Error
code
Description
CPU
Status
LED indicator status
ERROR
BUS
FAULT
16#E219 Turning on the system Continue Keep Keep
16#E21A Initialization error Continue Keep Keep
16#E21B CPU parameters are damage. Continue Keep Keep
16#E21C Non-latched area error Continue Keep Keep
16#E21D CPU EIP parameters are damage. Continue Keep Keep
16#E21E The I/O configuration file does not exist. Continue Keep Keep
16#E21F The I/O configuration file is damage. Continue Keep Keep
16#E221 PLC program error Continue Keep Keep
16#E230 Ethernet connection error in a redundancy system Continue Keep Keep
16#E260
Module on the main backplane slot 0 does not support
a redundancy system.
Continue Keep Keep
16#E261
Module on the main backplane slot 1 does not support
a redundancy system.
Continue Keep Keep
16#E262
Module on the main backplane slot 2 does not support
a redundancy system.
Continue Keep Keep
16#E263
Module on the main backplane slot 3 does not support
a redundancy system.
Continue Keep Keep
16#E264
Module on the main backplane slot 4 does not support
a redundancy system.
Continue Keep Keep
16#E265
Module on the main backplane slot 5 does not support
a redundancy system.
Continue Keep Keep
16#E266
Module on the main backplane slot 6 does not support
a redundancy system.
Continue Keep Keep
16#E267
Module on the main backplane slot 7 does not support
a redundancy system.
Continue Keep Keep
16#E268
Module on the main backplane slot 8 does not support
a redundancy system.
Continue Keep Keep
16#E269
Module on the main backplane slot 9 does not support
a redundancy system.
Continue Keep Keep
16#E26A
Module on the main backplane slot 10 does not
support a redundancy system.
Continue Keep Keep
16#E26B
Module on the main backplane slot 11 does not support
a redundancy system.
Continue Keep Keep
16#E270
Network module on the main backplane slot 0 does not
connect to a network cable.
Continue Keep Keep
16#E271
Network module on the main backplane slot 1 does not
connect to a network cable.
Continue Keep Keep
16#E272
Network module on the main backplane slot 2 does not
connect to a network cable.
Continue Keep Keep
16#E273
Network module on the main backplane slot 3 does not
connect to a network cable.
Continue Keep Keep
16#E274
Network module on the main backplane slot 4 does not
connect to a network cable.
Continue Keep Keep