AH500 Hardware and Operation Manual
A-12
3. After the computer is restarted, select “Troubleshoot”under “Choose an option”. And then
select “Advanced options”.
4. From the Advanced options page, select “Startup Settings” to see the Startup Settings. From
this page select “Restart” to restart the computer.
5. Press “7” or “F7” to choose “Disable driver signature enforcement” and the system will direct you
to the Windows 8 operating page. Users can then install the Delta PLC USB driver now.
6. For the Delta USB drive installation, please refer to installation in Windows 7 section.
To Next Page
Loading...
